< img height="1" width="1" style="display:none" src="https://a.gdt.qq.com/pixel?user_action_set_id=1106940728&action_type=PAGE_VIEW&noscript=1 "/>
聚氨酯催化剂 ,延迟胺催化剂,有机锡催化剂,硬泡催化剂,环保催化剂,亨斯迈催化剂 ,PU软泡胺催化剂 ,有机铋催化剂,低气味催化剂,金属催化剂
业界资讯
聚氨酯催化剂产品介绍
发布日期::2023-02-20 16:54:46
  1. 品名:三乙烯二胺NAME:HJCP-TEDA(TEDA) 含量>=99.85 用途:用于各种聚氨酯泡沫塑料 分子式FORMULA: C6H12N2 APPLICATION:Used for all kinds of Polyurethanefoam.

  2. 品名:A-33 HJCP-A33D(TEDA-33% DPG) HJCP-A33E(TEDA-33% MEG) HJCP-A33B(TEDA-33% BDO) 用途: 用于各种类型的聚氨酯泡沫塑料及微孔弹性体 APPLICATION: Used for PU foam and microcellular elastomer.

  3. 品名:延迟催化剂(1027) NAME: HJCP-A37E(Equivalent to1027) 用途:用于乙二醇系统鞋底和自结皮微孔泡沫系统的催化剂 APPLICATION:Delayed Catalyst, used for MEG extended shoe sole andintegral skin.

  4. 品名:延迟催化剂(1028) NAME: HJCP-A37B (Equivalent to1028) 用途:用于1,4丁二醇系统鞋底和自结皮微孔泡沫系统的催化剂 APPLICATION:Delayed Catalyst, used for BDO extended shoesole and integral skin.

  5. 品名:延迟催化剂(8154) NAME: HJCP-A34 (Equivalent to8154) 用途:用于汽车等座垫的生产加工,是一种具有延迟催化用的水溶性叔胺复合类催化剂。 APPLICATION: Delayed amine watersoluble0020catalyst, used for car seat.

  6. 品名:胺类催化剂(C-225) NAME: HJCP-AC25 (Equivalent toC225) 用途:快速脱模高回弹冷模塑泡沫的平衡性催化剂, 它能有效的平衡催化反应,优化流动性,并且能缩短脱模时间,是汽车座椅生产线上的最佳助剂。 APPLICATION:It is balance catalysts used for HR cold molded foamespecially for car seat.

  7. 品名:胺类催化剂(CS-90) NAME: HJCP-AP90(Equivalent to CS-90) 用途:用于软质块状泡棉 APPLICATION:Used for flexible slabstock foam.

  8. 品名:胺类催化剂(SMP) NAME: HJCP-SCLD (Equivalent toSMP) 用途:用于中低密度泡棉的生产 APPLICATION:Used for foam of medium and low density

  9. 品名:胺类催化剂(A-300) NAME: HJCP-AC300(Equivalent to A-300) 用途:适用于高回弹冷模塑泡沫的延迟凝胶催化剂, 它能有效的提高泡沫的开孔性,同时它不影响泡沫的凝胶速度。 APPLICATION: Delayed gel catalystapplicable to HR cold molded foam.

10品名:胺类催化剂(A-400) NAME: HJCP-AC400(Equivalent toA-400) 用途:适用于高回弹冷模塑泡沫的延迟吹发性催化剂, 特别适用于汽车座椅等产品。 APPLICATION: Delayed blowingcatalysts applicable to HR cold molded foam, especially for car seat. 

 11品名:辛酸亚锡(T9) NAME: HJCP-MCT9(Stannous Octoate) CAS NO:301-10-0 分子式FORMULA:C16H30O4Sn 用途:用于软质块状聚醚型聚氨酯泡沫塑料. APPLICATION: Used for polyethertype flexible slabstock foam. 

 12品名:二月桂酸二丁基锡(T12) NAME: HJCP-MCT12(DBTDL) CAS NO:77-58-7 分子式FORMULA:C32H64O4Sn 用途:用于弹性体,胶黏剂,密封胶,涂料,硬泡,模塑泡沫,RIM等,它可与胺催化剂并用于高速生产高密度结构泡沫,喷涂硬泡,硬泡板材。 APPLICATION: Used for CASE, rigidfoam and shoe sole etc 

 13品名:五甲基二乙烯三胺(PMDETA) NAME: HJCP-PMDETA(PMDETA) CAS NO:3030-47-5 分子式FORMULA:C9H23N3 用途:用于各种聚氨酯硬泡和聚醚型聚氨酯软块泡和模塑泡沫 APPLICATION: Used for all kindsof PU rigid foam and ployether PU flexible foam.

14品名:二甲基环己胺 NAME: HJCP-DMCHA(DMCHA) CAS NO:98-94-2 分子式FORMULA:C8H17N 用途:用于硬质聚氨酯泡沫塑料. APPLICATION: Used for rigid foam. 

 15品名:纯双(二甲氨基乙基)醚 NAME: HJCP-BDMAEE(BDMAEE) CAS NO: 3033-62-3 分子式FORMULA:C8H20N2O 

 16品名:(A-1) 70%双(二甲氨基乙基)醚(A-1) NAME: HJCP-A(A-1) BDMAEE:70% DPG:30% 用途: 用于聚氨酯泡沫塑料,特别适用于生产高回弹,半硬泡和低密度泡沫塑料。 APPLICATION:Used for polyurethane foam, especially for HR,semi-rigid foam and low-density foam. 

 17品名:异辛酸钾 NAME: HJCP-MCK(Potassium2-ethylhexanoate) CAS NO:3164-85-0 分子式FORMULA:C8H15O2K HJCP-MCK15 (Equivalent to K-15) HJCP-MCT45 (Equivalent to T-45) 用途:异辛酸钾是聚氨酯硬泡的三聚催化剂,活性高,用于喷涂硬泡,PIR(耐高温)硬泡和PU硬泡. APPLICATION: Used for rigid foamand PIR. 

 18品名:双吗啉基二乙基醚(DMDEE) NAME: HJCP-DMDEE(DMDEE) CAS NO.:6425-39-4 分子式FORMULA: C12H24N2O2 用途:用于单组分硬质聚氨酯泡沫体系,也可用于聚醚型和聚酯型聚氨酯软泡,半硬泡,CASE材料等. APPLICATION:Used forone-component polyurethane rigid foam, it can also be used for flexible foam ,semi-rigid foam and CASE etc. 

 19品名:二甲基乙醇胺 NAME:MEA 用于聚氨酯软质块状泡沫, 模塑泡沫和硬质泡沫, 阴燃弹性泡沫等;用作水溶性涂料助溶剂, 聚氨酯漆固化剂; 

 20品名:甲基膦酸二甲酯 NAME: DMMP CAS NO:756-79-6 分子式FORMULA: C3H9O3P 用途: 是一种高效的有机磷阻燃剂,用于软质和硬质聚氨酯泡沫塑料,阻燃效果很好。 APPLICATION: Phosphoric flameretardant, used for flexible and rigid PU foam. 

 21品名:乙基膦酸二乙酯 NAME: DEEP CAS NO:78-38-6 分子式FORMULA: C6H15O3P 用途:是一种新型的高效有机磷阻燃剂,可广泛添加在各种硬质聚氨酯泡沫塑料中。 APPLICATION: Phosphoric flameretardant, used for rigid PU foam.

返回列表
×
聚氨酯催化剂 ,延迟胺催化剂,有机锡催化剂,硬泡催化剂,环保催化剂,亨斯迈催化剂 ,PU软泡胺催化剂 ,有机铋催化剂,低气味催化剂,金属催化剂
97超碰天天摸_国产精品自在线拍国产不卡_六月婷婷最新中文字幕网站_秒拍视频福利永久国产